Drill Guide
Results: 5
Countersink Holding Device.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Drill press guide is designed to achieve accurate control of the countersinking process for those with limited hand function. To construct the fixture, a small cradle is welded to a piece of steel tubing with a U shaped strip welded to the opposite end. A clamp holds the countersink in the cradle. The U shaped strap guides the drill press without interfering with its normal action. Includes illustration. SKILLS REQUIRED: Welding. AUTHOR: Aikens, T; Wat
Diy Drill Guard
---- DO IT YOURSELF ENTRY --------- PURPOSE: To create a do-it-yourself drill guide for an individual with low-vision. The DIY drill guide is created using an empty spool of thread or a sewing machine bobbin. First mark the spot to be drilled by making a "start hole" with an awl, nail, or ice pick. Next place the drill bit through the spool or bobbin and align the point of the bit with the start hole. With the drill in the "off" position, place the flat end of the spool or bobbin firmly against
Drill Press Jig.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Work holding jig to uniformly position location of object to be drilled by a blind operator. Work holder is placed in drill press vice, positioned so drill bit will center and drill desired location. Includes drawing of assembly. May be available from developer for $25, template cut to customer design. SKILLS REQUIRED: Woodworking. AUTHOR: Gugerty, J.; Tindall, L. TITLE: Tools, Equipment & Machinery Adapted for the Vocational Education & Employ
Drilling Jig For Improved Accuracy.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Jig for positioning items when using a drill press. The jig assists in positioning parts for accurate drilling. It is made with a simple angle iron support to keep it level and a fixed stop to assure the hole will be drilled in the same at the same angle each time. Includes photograph. SKILLS REQUIRED: Assembly. AUTHOR: Charles Eckles, Independent Consultant, CA Dept. of Rehab. TITLE: Tools, Equipment and Machinery Adapted for the Vocational Education
Spindle Drilling Fixture.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Fixture is modified to allow person with use of one hand, and limited reach and stamina to operate a drill press. Fixture is designed with spindle positioned at 45 degree angle to work surface. Spindle is supported by V blocks and an adjustable end stop. A lever clamp holds the spindle in the V blocks. A pneumatically driven power feed drill is used to perform drilling operation. Includes diagram. COMMENTS: For further information contact Cerebral Pals